To clean your Bissell vacuum, start by emptying the dust bin or replacing the bag to prevent suction loss. Remove and rinse the filters under cool water, letting them dry completely before reinstalling. Clear hair and debris from the brush roll by cutting tangled threads and removing buildup. Check the hose for blockages and clean with a flexible brush if needed. Finally, wipe down the exterior and attachments to keep everything running smoothly. Keep going to uncover more useful maintenance tips.
Empty and Clean the Dust Bin or Bag
Before you begin cleaning your Bissell vacuum, make sure to empty the dust bin or replace the bag.
If your vacuum uses a dust bin, detach it carefully by pressing the release button. Dump the contents into a trash can, then use a damp cloth to wipe the inside of the bin, removing any stuck debris.
For bagged models, check the bag’s fullness indicator; if it’s nearly full, replace it with a new bag to maintain suction power.
Avoid overfilling the bin or bag, as this can reduce cleaning efficiency.
Make sure the dust bin or new bag is securely reattached before you continue using your vacuum.
This simple step keeps your vacuum running smoothly and prevents dust from escaping back into your home.
Remove and Wash the Filters
After emptying the dust bin or replacing the bag, turn your attention to the filters. Locate the filters, which are usually near the dust bin or inside the vacuum’s water tank if you have a Bissell carpet cleaner.
Remove them carefully, noting how they fit to ensure easy reassembly. Rinse the filters under cool running water to wash away dust and debris. Avoid using soap or harsh chemicals, as these can damage the filter material.
Gently squeeze out excess water without wringing or twisting, then let the filters air dry completely for at least 24 hours before placing them back. Never reinstall damp filters, as this can cause mold growth and reduce suction power.
Regular filter cleaning keeps your Bissell vacuum running efficiently and prolongs its lifespan.
Clear the Brush Roll and Remove Hair
When your vacuum’s brush roll gets tangled with hair and debris, it can reduce cleaning performance and strain the motor. To clear it, first unplug your Bissell vacuum for safety.
Locate the brush roll by flipping the vacuum over and removing the bottom plate, usually secured with clips or screws.
Use scissors or a seam ripper to carefully cut away hair and threads wrapped tightly around the brush.
Pull out any loosened debris by hand or with tweezers. Avoid damaging the bristles while cleaning.
Once the brush roll is free of obstructions, reattach the bottom plate securely.
Regularly clearing the brush roll keeps your vacuum running efficiently and extends its lifespan, ensuring better suction and less motor strain during use.
Check and Clean the Vacuum Hose
Although vacuum hoses are designed to handle dirt and debris, they can still get clogged over time, reducing your Bissell vacuum’s suction power.
To check the hose, detach it from the vacuum and inspect both ends for visible blockages. Shine a flashlight through the hose to spot any debris lodged inside.
If you find clogs, use a long, flexible brush or a straightened wire hanger wrapped in a cloth to gently push out the debris. Avoid sharp objects that might damage the hose.
After clearing blockages, rinse the hose with warm water if it’s washable, then let it dry completely before reattaching.
Regularly checking and cleaning the hose ensures your vacuum runs efficiently and prolongs its lifespan.
Wipe Down the Exterior and Attachments
Once you’ve cleared the hose of blockages, give your Bissell vacuum a fresh look by wiping down its exterior and attachments. Use a soft, damp cloth with mild soap or a gentle cleaner to remove dust, dirt, and grime from the vacuum’s surface. Avoid soaking any electrical components or openings.
Pay special attention to the handle, buttons, and wheels, as these areas tend to accumulate dirt. For attachments like brushes and nozzles, wipe them thoroughly and remove any tangled hair or debris.
Dry all parts completely before reassembling to prevent moisture damage. Keeping the exterior and attachments clean not only improves your vacuum’s appearance but also ensures smooth operation and prolongs its lifespan.
Frequently Asked Questions
How Often Should I Deep Clean My Bissell Vacuum?
You should deep clean your Bissell vacuum every 3 to 6 months, depending on usage. If you vacuum frequently or have pets, consider cleaning it more often to maintain optimal performance and extend its lifespan.
Can I Use Vinegar to Clean Bissell Vacuum Parts?
You shouldn’t use vinegar to clean Bissell vacuum parts because it can damage seals and plastic. Instead, stick to mild soap and water for washable parts, and always check your model’s manual for specific cleaning instructions.
How Do I Fix a Bissell Vacuum That Won’T Turn On?
Check if your Bissell vacuum’s power cord is plugged in and the outlet works. Inspect the reset button and fuse. Also, clean or replace filters and brush rolls. If it still won’t turn on, contact support.
Are Bissell Vacuum Filters Washable or Replaceable Only?
Bissell vacuum filters can be both washable and replaceable, depending on the model. You should check your specific vacuum’s manual—some filters need rinsing and drying, while others require replacement to maintain optimal performance.
What Is the Best Way to Store My Bissell Vacuum?
You should store your Bissell vacuum in a cool, dry place, upright to prevent damage. Keep the cord neatly wrapped, and empty the dirt bin after each use. This keeps it ready and prolongs its life.
Conclusion
Keeping your Bissell vacuum clean ensures it works at its best and lasts longer. Regularly empty the dust bin or replace the bag, wash the filters, and clear hair from the brush roll. Don’t forget to check and clean the hose to avoid clogs. Finally, wipe down the exterior and attachments to maintain its appearance. Following these simple steps will help your vacuum perform efficiently every time you use it.
